Memorex RX 1 Smart Installationshandbuch PDF herunterladen (Seite 152)

150 | Appendix B - Engineering mode

Antenna Reset Tools

Special tools are available in the MX51x CDU that can be used to reset the GPS and

Beacon engines in the smart antenna. Use them only in extreme cases when the GPS or

beacon receiver fails or takes too long to lock-on. The “MX Ant Reset” softkey will clear

the satellite almanac memory of the GPS engine and reset all settings of the antenna to

factory default conditions. The “CSI Reset” softkey resets the differential beacon board.

Antenna Reset Procedure:

This procedure will work only under Engineering level mode.

Press the

1 AUX key several times to bring up the AUX7 screen

Press the

2 EDIT key

Press the ‘#1’ or ‘NAV’ button 3 times (to bring-up Eng’g level 3)

Press the EDIT key 2 times4

Highlight the 5 “MX Ant Reset” softkey then press ENT to reset the GPS engine (or

the “CSI Reset” softkey to reset the beacon engine)

Press the

6 EDIT key to exit

Press the

7 GPS key to display the GPS or DGPS Status screen

1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 199 200

Keine Kommentare

Memorex RX 1 Smart Installationshandbuch Seite 152