Memorex RX 1 Smart Installationshandbuch PDF herunterladen (Seite 42)

40 | Keypad & Display Description

press ENT to select it.

Scroll left to “

4 Make new WPT” and press ENT to start entering L/L coordinates for

waypoint #1 or if you want to modify an existing waypoint, highlight the “Edit this

WPT” softkey then press ENT.

a Make New WPT - Select Lat/Lon (W84), Lat/Lon Datum, or Range Bearing.

Lat/Lon (W84) - allows you to enter coordinates in the WGS 84 datum. This

choice takes you directly into the coordinate input screen. Go to step 5.

Lat/Lon Datum - allows you to choose a datum (see the list in the screen

sample above) from the more than 110 available Datums. Highlight the desired

datum and highlight the Select softkey then press ENT. Refer to Appendix A -

Datum List for a complete list of datums and their WGS-84 offset. Go to step 5.

Range Bearing - allows you to define new waypoint coordinates from an existing

waypoint in the Waypoint Bank. When you use this feature make sure you align

the cursor next to the from waypoint number before you highlight the Make

New WPT softkey and press ENT.

Once you have entered the range and bearing, the CDU calculates the

coordinates. You can then enter a text description or modify the waypoint

number as described in step 6 below. Go to step 6.

Edit This WPT

b - Select Accept to use the WGS 84 datum or highlight Change

and press ENT to choose from the more than 110 available Datums. Highlight

the desired datum and highlight the Select softkey then press ENT. Refer to

Appendix A - Datum List for a complete list of datums and their WGS 84 offset.

Enter the appropriate coordinates using the cursor key and numeric keypad.5

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 199 200

Keine Kommentare

Memorex RX 1 Smart Installationshandbuch Seite 42