Memorex RX 1 Smart Installationshandbuch PDF herunterladen (Seite 40)

38 | Keypad & Display Description

In this mode, the actual SOG is compared to the required SOG to meet the specified arrival

date and time. The result is given in a percentage (%) value next to the displayed SOG in

the NAV screens. If the percentage is below 100, you will arrive late. If the percentage is

above 100, you will arrive early.

ETA Based on Speed:

Select a 1 Speed Basis of either GPS SOG, which uses a long lter time (in seconds)

that you dene, or Constant, which uses a speed you intend to maintain (you

dene the speed).

Highlight the

2 Done softkey and press ENT.

RTE2 - The Route Bank

The Route Bank is a convenient place to pre-program segments of a long voyage, or to

program routes that you follow repeatedly. Creating routes for the Route Bank uses the

same methods as the Active Route with a few exceptions: you can’t use the GOTO key,

and you can’t use the Plotter screen. You can use other routes as a subset to create a new

route. Remember, you can always tie routes together in the Active Route by inserting one

after another. You will find a Route Name softkey when you first enter the edit mode. The

Route Name allows you to clearly identify each route by name, number and symbol when

you are viewing the Route Bank from the main menu. To create a route:

Select the

1 RTE key until the RTE2 screen is displayed.

Move the cursor to the route number you want to create or edit.

Press the 3 EDIT key.

Use the entry methods described in the

4 Creating a Multi-Waypoint Active Route

section.

If you have a route in RTE1 that is not stored in RTE2, you can copy it into the

Route Bank by selecting Insert then Insert Route, either in the forward or reverse

direction.

Highlight the

5 Escape softkey and press ENT.

When you are nished adding waypoints, highlight the

6 Route Name softkey and

press ENT.

You can enter any name, number or symbol you want this route to be identified by.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 199 200

Keine Kommentare

Memorex RX 1 Smart Installationshandbuch Seite 40