Memorex RX 1 Smart Installationshandbuch PDF herunterladen (Seite 83)

Keypad & Display Description | 81

The POS 5 screen displays the (D)GPS calibrated LORAN-C position received from the

GLL message from the LORAN-C receiver.

The POS 6 screen displays the stand-alone (uncorrected) LORAN-C position received

from the RMA message from the LORAN-C receiver.

When Loran-C (Raytheon) option is enabled, the MX51x gives the option to accept

EUROFIX DGPS corrections instead of the External DGPS corrections under the CFG1/

DGPS Configuration screen.

Locus:

To implement this feature, change LORAN-C connected to Yes.

Identify the appropriate input port (1 or 2) where the LORAN-C device connects to by

using the Change softkey.

Select the chain selection mode, either Auto or Manual.

Auto:

When the chain selection mode is Auto, you can view the list of current chains by using

the left or right arrow key to highlight the List Chains softkey and press the ENT key to

select. You can also choose the desired region by using the left or right arrow key to

highlight the Change softkey and press the ENT key to select.

Manual:

Select this option to manually add or remove the list of chains. To add a chain, use

the left or right arrow key to highlight the Add Chain softkey, and press the ENT key to

select. Enter the 4 digits chain GRI then select the Done softkey to add the chain. To

remove a chain, use the left or right arrow key to highlight the Remove Chain softkey,

and press ENT to select. Enter the 4 digit chain GRI and select the Done oftkey to

remove the chain.

You can view the list of current chains by using the left or right arrow key to highlight the

List Chains softkey, then press ENT to select.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 199 200

Keine Kommentare

Memorex RX 1 Smart Installationshandbuch Seite 83