Memorex RX 1 Smart Installationshandbuch PDF herunterladen (Seite 45)

Keypad & Display Description | 43

Press the 5 EDIT key.

If you simply want to modify the waypoint, Edit this WPT will be displayed on the

bottom left of the screen.

To Lock all Waypoints

Press the

1 WPT key.

Scroll to the desired waypoint.

Press the 3 EDIT key.

Highlight the

4 More softkey and press ENT.

Highlight the

5 More softkey again and press ENT.

Highlight the 6 Lock all WPT softkey and press ENT.

Press the

7 EDIT key.

To Unlock all Waypoints

Press the

1 WPT key.

Scroll to the desired waypoint.

Press the 3 EDIT key.

Highlight the

4 More softkey and press ENT.

Highlight the

5 More softkey again and press ENT.

Highlight the 6 Unlock all WPT softkey and press ENT.

Press the

7 EDIT key.

Removing Waypoints

Unlocked waypoints can be overwritten manually or by waypoints received on the NMEA

port. Waypoints that are contained within a stored route can not be removed until they are

removed from the stored route in the RTE2 screen. If you try to remove a waypoint stored

in a route, a warning will be displayed indicating the first route a waypoint is stored in.

If the waypoint you want remove is locked, refer to the Waypoint Lock/Unlock section for

a step by step procedure, and then return to this section.

To remove a waypoint:

Press the

1 WPT key.

Scroll to the desired waypoint.

Press the 3 EDIT key.

Highlight the

4 Remove softkey then press ENT.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 199 200

Keine Kommentare

Memorex RX 1 Smart Installationshandbuch Seite 45