Memorex RX 1 Smart Installationshandbuch PDF herunterladen (Seite 13)

12 | Simrad MX500

MX500 USB Feature Overview

USB stands for Universal Serial Bus, and is a data port

in the MX500 that allows the use of USB flash drive

(memory stick) to save and restore waypoints, routes

and configuration data. In addition it can also be used to

download the MX500 firmware for software updates. Not

all commercially available USB flash drives are compat-

ible with the MX500.

USB Formatting:

Before the USB device (i.e. flash drive) can be used for

the MX500, it is important to format it to FAT32 file sys-

tem. This is available from any PC running Windows XP or

higher.

USB Waterproong:

When the USB port in the MX500 is not in use, please

close the rubber flap in order to maintain splashproof

integrity.

Do not remove the USB rubber ap completely from

the MX500 unit. This will affect the splashproof

integrity.

MX500 Networking Overview

The MX500 networking technology lets you connect two

or more MX500 units in Dual-Control or Multiple Unit

Control configuration via LAN (Local Area Networking)

in order to share navigation data among the units. A

change to routes and waypoints in the master or in a

slave unit is mirrored on all the networked units.

One MX500 is designated as the master and all others as

slaves or repeaters. The only restrictions on the network-

ing are the following:

There must be one and only one master unit operat- •

ing in a network.

All MX500 units must have the same software version. •

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 261 262

Keine Kommentare

Memorex RX 1 Smart Installationshandbuch Seite 13