Memorex RX 1 Smart Installationshandbuch PDF herunterladen (Seite 78)

Simrad MX500 | 77

Highlight the 10 Done softkey and press ENT.

Set the 11 WPL record to Off (you will need to turn the

data off while setting up the computer).

On the computer, select 12 All Programs - Accessories

- Communications, and click on the Hyper Terminal

icon.

Give your 13 Connection Description a name and click

OK.

Under the Connect using option, choose 14 COM1 (or

COM2, depending where the external interface is).

Make the following 15 Port Settings:

4800 baud

8 data bits

1 stop bit

Parity - none

Flow Control - none

Click on the 16 Transfer menu and select Capture

Text.

Click on 17 Browse and make the following settings.

[give the file a name.txt]

[select a location (folder) to store the file]

On the CDU, you should still be in edit mode on 18

CFG1 NMEA Out 2 with the cursor ashing on Off

at the WPL record. Select the Send All softkey.

When all the waypoint sentences are sent, click 19

on Transfer - Capture Text - Stop from the Hyper

Terminal program.

Press the 20 EDIT key on the CDU to exit the edit

mode.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 261 262

Keine Kommentare

Memorex RX 1 Smart Installationshandbuch Seite 78