Memorex RX 1 Smart Installationshandbuch PDF herunterladen (Seite 34)

Simrad MX500 | 33

line changes direction at the flags, which represent your

waypoints, and continues through to the end of the ac-

tive route you entered in RTE1. Notice that the cross-

track error lines end at the first flag. As you pass the flag

and start the next leg of your course, these lines will be

redrawn to reflect the course change. Icons that you see

left and right of your course are navigation markers that

you define in the Waypoint Bank (WPT1) where a sym-

bol is used as the first character of the waypoint descrip-

tion. The Panorama and Plot screens will automatically

place these navigation markers on the screen as you

approach them.

The degree values that you see are your Course Over

Ground (COG), as calculated by the GPS receiver’s posi-

tion fix to position fix, and Bearing (BRG) from your

present position to the waypoint. The speed value is your

Speed Over Ground (SOG) as calculated by the GPS. The

distance value displayed as the Range (RNG) is calculated

from your present position to the waypoint. The Time-To-

Go (TTG) is the calculated time it will take you to reach

the waypoint, based on your Waypoint Closure Velocity

(see NAV4 description).

To keep the screen from jumping around when you are

stopped, the screen freezes the graphic representation

when your speed is under 0.5 Kn in DGPS mode or 2.0

Kn in GPS mode. Once you get underway, your course

details will update appropriately.

You will see a RL or GC symbol in the upper right cor-

ner of the display indicating whether you are navigating

under Rhumb Line or Great Circle. This is set in the CFG

Navigate menu.

If you press the EDIT key, the Panorama Display Option

screen will allow you to customize the information pre-

sented.

View • - allows you to adjust the display for a Close

(zoomed-in) or a Far (zoomed-out) representation of

your route.

Show Waypoints • - allows you to turn waypoints which

are not part of the active route on and off.

Show Active Route • - allows you to turn the course line

on or off on the display (assuming a symbol is entered

for the first charac ter of the waypoint name).

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 261 262

Kommentare zu diesen Handbüchern

Keine Kommentare

Memorex RX 1 Smart Installationshandbuch Seite 34

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Navigatoren Memorex RX 1 Smart