Memorex RX 1 Smart Installationshandbuch PDF herunterladen (Seite 42)

Simrad MX500 | 41

Route

There are two RTE screens. The NAV functions are

highly interactive with the RTE1 screen. The RTE2

screen allows you to create a pool of predetermined

routes that you might use often, so you need only create

the route one time. Routes are created from waypoints.

All waypoints are stored in the Waypoint Bank, regard-

less of which function is used to create them. Waypoints

are either created in the Waypoint Bank (WPT1), created

by the GOTO function, selected from the PLOT screens

in conjunction with the GOTO function, or from New

Waypoints that can be defined in the Route Insert menu

(and simultaneously stored in the route and the Waypoint

Bank).

We recognize the diverse needs of professional users.

We have designed the route features to be very flexible

to meet a wide range of users’ requirements by allow-

ing up to 2000 waypoints to be stored between all of the

routes. You can create up to 99 routes, with any number

of waypoints, providing the maximum number of 2000

waypoints between all routes is not exceeded.

The Route (RTE) function serves two purposes:

First, the RTE1 screen provides all of the current, or ac-

tive waypoint navigation data to the Navigate and Plot

screens and is referred to as the Active Route. Therefore,

whenever you begin a new trip or voyage, you should

erase the previous voyage’s waypoints in this screen,

then insert the new waypoints or routes (from RTE2) for

the new voyage. If you want to store the waypoints from

the previous active route for future use, you can copy

these waypoints in the order in which they were entered

to the Route Bank in the RTE2 screen. This is described

in the RTE2 - The Route Bank section of this manual. If

you do not clear the RTE1 screen (refer to Erasing an

Existing Route section of this manual), the RTE1 screen

will grow each time you add new waypoints to the route.

The route function can hold a maximum of 2,000 way-

points between the routes stored in RTE1 and RTE2.

Second, the RTE2 screen provides storage space for up

to 100 user defined routes. You can pre-define routes,

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 261 262

Keine Kommentare

Memorex RX 1 Smart Installationshandbuch Seite 42