Memorex RX 1 Smart Installationshandbuch PDF herunterladen (Seite 88)

Simrad MX500 | 87

Show Lat/Lon Grid • - No is the default condition, which

causes the coordinate grid not to be displayed. Yes

causes the Lat/Lon grid to be displayed (regardless

of positioning reference system selection in CFG1

Position). Note that the grid is only displayed at the 4

Nm scale or lower.

Automatic Zoom • - No is the default condition, which

causes the displayed scale to be controlled by you.

Yes causes the boat icon to be placed along one edge

of the screen and the next waypoint flag to be placed

along the opposite edge of the screen. As you ap-

proach your waypoint, the screen will automatically

zoom in on your course, then expand back out after

you pass the waypoint and start the next leg of your

course.

If you highlight the Return softkey and press ENT, then

highlight the Track Plotter softkey and press ENT, you

will access the recorded track options.

Selecting Erase Track then pressing the ENT key allows

you to clear your recorded track. You can keep a portion,

say the last mile or two, of your recorded track if you

like, by specifying the range after you highlight the Erase

Track softkey and press ENT. Highlight Erase Now and

press ENT to confirm your action. Highlight Escape and

press ENT to return the previous screen without erasing

or EDIT to abort this process.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 261 262

Keine Kommentare

Memorex RX 1 Smart Installationshandbuch Seite 88